Displaying The Arp Table - Dell PowerConnect B-RX Configuration Manual

BigIron RX#show ip arp inspection vlan 2
IP ARP inspection VLAN 2: Disabled
Trusted Ports :
Untrusted Ports : ethe 2/1 to 2/3 ethe 4/1 to 4/24 ethe 6/1 to 6/4 ethe 8/1 to
8/4
Syntax: show ip arp inspection [vlan <vlan_id>]
The <vlan_id> variable specifies the ID of a configured VLAN.

Displaying the ARP table

To display the ARP table, enter the following command.
BigIron RX#show arp
Total number of ARP entries: 10
1
2
3
4
5
6
7
8
9
10
The command displays all ARP entries in the system.
Syntax: show arp
TABLE 166
This field...
IP Address
MAC Address
Age
Port
BigIron RX Series Configuration Guide
53-1002253-01
ethe 1/4
IP Address MAC Address
20.20.20.39 0000.4623.ed91
20.20.20.40 0000.4623.ed8f
20.20.20.41 0000.4623.ed8d
20.20.20.42 0000.4623.ed8b
20.20.20.43 0000.2698.7027
20.20.20.44 0000.4623.ed89
20.20.20.45 0000.4623.ed87
10.43.11.1 0004.80a0.4000
10.43.11.45 0060.e040.a0c4
60.60.60.209 00d0.09a0.bd84
show arp command
Dynamic ARP inspection
Type Age Port
Dhcp 3/3386 5/20
Dhcp 3/3386 5/20
Dhcp 6/3321 5/20
Inspect 4 5/20
Inspect 4 5/20
Inspect 63 5/20
Inspect 182 5/20
Dynamic 0 mgmt1
Dynamic 1 mgmt1
Inspect 14 0/64
Displays....
The IP address of the device.
The MAC address of the device.
The ARP Age, which can be one of the following:
•
The number of minutes the entry has remained
unused. If this value reaches the ARP aging period
of 10 minutes, the entry is removed from the table.
•
The Inspect Pending entries are never removed
from the ARP Table and are displayed in seconds
not minutes.
•
The Inspect Valid entries are displayed in minutes
and after 10 minutes of aging may be changed
from Valid to Pending.
•
The DHCP age is in the form of x/y where x
represents the ARP age in minutes and y
represents the lease time remaining of the client.
NOTE: Static entries do not age out.
This field shows the port on which the entry was
learned.
35
Status
Valid
Valid
Valid
Valid
Valid
Pending
Pending
Valid
Valid
Pending
1005