Clearing Cdp Information - Dell PowerConnect B-RX Configuration Manual

37
Reading CDP packets
BigIron RX# show fdp entry *
Device ID: Router
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 124 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Syntax: show fdp entry * | <device-id>
To display CDP entries for a specific device, specify the device ID. Here is an example.
BigIron RX# show fdp entry Router1
Device ID: Router1
Entry address(es):
IP address: 207.95.6.143
Platform: cisco RSP4,
Interface: Eth 1/1,
Holdtime : 156 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1,
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Displaying CDP statistics
To display CDP packet statistics, enter the following command.
BigIron RX# show fdp traffic
CDP counters:
Total packets output: 0, Input: 3
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Fragmented: 0
Syntax: show fdp traffic

Clearing CDP information

You can clear the following CDP information:
•
Cisco Neighbor information
•
CDP statistics
To clear the Cisco neighbor information, enter the following command.
BigIron RX# clear fdp table
Syntax: clear fdp table
1030
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
Capabilities: Router
Port ID (outgoing port): FastEthernet5/0/0
RELEASE SOFTWARE
RELEASE SOFTWARE
BigIron RX Series Configuration Guide
53-1002253-01