Lldp Neighbors - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

9
Configuring LLDP
This field...
Rx Pkts Total
Rx Pkts w/Errors
Rx Pkts Discarded
Rx TLVs Unrecognz
Rx TLVs Discarded
Neighbors Aged Out

LLDP neighbors

The show lldp neighbors command displays a list of the current LLDP neighbors per port.
The following shows an example report.
BigIron RX#show lldp neighbors
Lcl Port Chassis ID
1
1
3
4
4
15
16
17
18
Syntax: show lldp neighbors
The following table describes the information displayed by the show lldp neighbors command.
This field...
Lcl Port
Chassis ID
Port ID
Port
Description
System Name
276
Displays...
The number of LLDP packets the port received.
The number of LLDP packets the port received that have one or more detectable errors.
The number of LLDP packets the port received then discarded.
The number of TLVs the port received that were not recognized by the LLDP local agent.
Unrecognized TLVs are retained by the system and can be viewed in the output of the
show LLDP neighbors detail command or retrieved through SNMP.
The number of TLVs the port received then discarded.
The number of times a neighbor's information was deleted because its TTL timer
expired.
Port ID
0004.1234.0fc0
0004.1234.0fc0
00e0.5201.4000
00e0.5201.4000
00e0.5211.0200
00e0.5211.0203
00e0.5211.0200
00e0.5211.0202
00e0.5211.0200
00e0.5211.0210
00e0.5211.0200
00e0.5211.020f
00e0.5211.0200
00e0.5211.020e
00e0.5211.0200
00e0.5211.0211
00e0.5211.0200
00e0.5211.0210
Displays...
The local LLDP port number.
The identifier for the device.
Brocade devices use the base MAC address of the device as the Chassis ID.
The identifier for the port.
Brocade devices use the permanent MAC address associated with the port as the port ID.
The description for the port.
Brocade devices use the ifDescr MIB object from MIB-II as the port description.
The administratively-assigned name for the system.
Brocade devices use the sysName MIB object from MIB-II, which corresponds to the CLI
hostname command setting.
NOTE: A tilde (~) at the end of a line indicates that the value in the field is too long to display in
full and is truncated.
Port Description
GigabitEthernet9/1
GigabitEthernet0/1/1
GigabitEthernet4
GigabitEthernet3
GigabitEthernet17
GigabitEthernet16
GigabitEthernet15
GigabitEthernet18
GigabitEthernet17
BigIron RX Series Configuration Guide
System Name
BigIron RX 32~
BigIron RX 4~
BigIron RX 4~
BigIron RX 16~
BigIron RX 4~
BigIron RX 8~
BigIron RX 16~
BigIron RX 4~
BigIron RX 4~
53-1002253-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents