Dell PowerConnect B-RX Configuration Manual page 303

BigIron RX> show ip cache
Cache Entry Usage on LPs:
Module
15
Syntax: show ip cache [<ip-addr>] [| begin <expression> | exclude <expression> | include
The <ip-addr> parameter displays the cache entry for the specified IP address.
The show ip cache command shows the forwarding cache usage on each interface module CPU.
The CPU on each interface module builds its own forwarding cache, depending on the traffic. To
see the forwarding cache of a particular interface module, use the rconsole.
BigIron RX>rconsole 15
Connecting to slave CPU 15/1... (Press CTRL-Shift-6 X to exit)
rconsole-15/1@LP>show ip cache
Total number of host cache entries 3
D: Dynamic P:Permanent, F:Forward U:Us C:Conected Network
W:Wait ARP
1
2
3
You also use the rconsole to display the IP Forwarding Cache for network entries.
BigIron RX>rconsole 15
Connecting to slave CPU 15/1... (Press CTRL-Shift-6 X to exit)
rconsole-15/1@LP>show ip network
Total number of host cache entries 3
D: Dynamic P:Permanent, F:Forward U:Us C:Conected Network
W:Wait ARP
1
2
3
The show ip cache and show ip network commands entered on the rconsole display the following
information.
TABLE 55
This field...
IP Address
Next Hop
MAC
BigIron RX Series Configuration Guide
53-1002253-01
Host Network
6 6
<expression>]
I:ICMP Deny
IP Address Next Hop
30.1.0.0 DIRECT
20.1.0.0 DIRECT
7.7.7.3 DIRECT
I:ICMP Deny
IP Address Next Hop
0.0.0.0/0 DIRECT
20.1.1.0/24 DIRECT
40.40.40.0/24 30.1.1.10
CLI display of IP forwarding cache
Free Total
204788 204800
K:Drop R:Frament S:Snap Encap
MAC
0000.0000.0000
0125.0a57.1c02
0000.0000.0000
K:Drop R:Frament S:Snap Encap
MAC
0000.0000.0000
0000.0000.0000
0000.0000.0033
Displays...
The IP address of the destination.
The IP address of the next-hop router to the destination. This field contains
either an IP address or the value DIRECT. DIRECT means the destination is
either directly attached or the destination is an address on this Brocade
device. For example, the next hop for loopback addresses and broadcast
addresses is shown as DIRECT.
The MAC address of the destination.
NOTE: If the entry is type U (indicating that the destination is this Brocade
device), the address consists of zeroes.
Displaying IP information
N:CAMInvalid
Type Port VLAN
PU 2/5 n/a
D 3/5 n/a
PU 4/2 12
N:CAMInvalid
Type Port VLAN
PK n/a
PC n/a
PF 15/14 154
7
Pri
0
0
1
Pri
0
0
1
227