Displaying The Active Bgp4 Configuration; Displaying Summary Neighbor Information - Dell PowerConnect B-RX Configuration Manual

TABLE 124
This field...
Sent
ToSend

Displaying the active BGP4 configuration

To view the active BGP4 configuration information contained in the running configuration without
displaying the entire running configuration, enter the following command at any level of the CLI.
BigIron RX# show ip bgp config
router bgp
local-as 200
neighbor 102.102.1.1 remote-as 200
neighbor 102.102.1.1 ebgp-multihop
neighbor 102.102.1.1 update-source loopback 1
neighbor 192.168.2.1 remote-as 100
neighbor 200.200.2.2 remote-as 400
neighbor 1000:2::1:1 remote-as 200
neighbor 2000:1::1:2 remote-as 400
neighbor 4444::1 remote-as 300
address-family ipv4 unicast
no neighbor 1000:2::1:1 activate
no neighbor 2000:1::1:2 activate
no neighbor 4444::1 activate
exit-address-family
address-family ipv4 multicast
exit-address-family
address-family ipv6 unicast
redistribute static
neighbor 1000:2::1:1 activate
neighbor 2000:1::1:2 activate
neighbor 4444::1 activate
exit-address-family
end of BGP configuration
Syntax: show ip bgp config

Displaying summary neighbor information

To display summary neighbor information, enter a command such as the following at any level of
the CLI.
BigIron RX Series Configuration Guide
53-1002253-01
BGP4 summary information (Continued)
Displays...
The number of BGP4 routes that the device has sent to the neighbor.
The number of routes the device has queued to send to this neighbor.
Displaying BGP4 information
26
827