Displaying Source Active Cache Information; Clearing Msdp Information - Dell PowerConnect B-RX Configuration Manual

23

Clearing MSDP information

TABLE 102
This field...
RcvQue
SendQue

Displaying source active cache information

To display the Source Actives in the MSDP cache, use the following CLI method.
BigIron RX# show ip msdp sa-cache
Total Entry 4096, Used 1800 Free 2296
Index
1
2
3
4
5
6
7
8
9
10
Syntax: show ip msdp sa-cache
This display shows the following information.
TABLE 103
This field...
Total Entry
Used
Free
Index
SourceAddr
GroupAddr
RP
Age
Clearing MSDP information
You can clear the following MSDP information:
•
•
•
642
MSDP peer information (Continued)
SourceAddr GroupAddr
(100.100.1.254, 232.1.0.95), RP:206.251.17.41, Age:0
(100.100.1.254, 237.1.0.98), RP:206.251.17.41, Age:30
(100.100.1.254, 234.1.0.48), RP:206.251.17.41, Age:30
(100.100.1.254, 239.1.0.51), RP:206.251.17.41, Age:30
(100.100.1.254, 234.1.0.154), RP:206.251.17.41, Age:30
(100.100.1.254, 236.1.0.1), RP:206.251.17.41, Age:30
(100.100.1.254, 231.1.0.104), RP:206.251.17.41, Age:90
(100.100.1.254, 239.1.0.157), RP:206.251.17.41, Age:30
(100.100.1.254, 236.1.0.107), RP:206.251.17.41, Age:30
(100.100.1.254, 233.1.0.57), RP:206.251.17.41, Age:90
MSDP source active cache
Peer information
Source Active cache
MSDP statistics
Displays...
The number of sequence numbers in the receive queue.
The number of sequence numbers in the send queue.
Age
Displays...
The total number of entries the cache can hold.
The number of entries the cache currently contains.
The number of additional entries for which the cache has room.
The cache entry number.
The IP address of the multicast source.
The IP multicast group to which the source is sending information.
The RP through which receivers can access the group traffic from the
source
The number of seconds the entry has been in the cache
BigIron RX Series Configuration Guide
53-1001810-01