Displaying Sflow Information; Display Sflow Configuration And Statistics - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Displaying sFlow information

Use one of the following commands to display sFlow information.

Display sFlow configuration and statistics

To display sFlow configuration information and statistics, enter the following command at any level
of the CLI.
BigIron RX(config)# show sflow
sFlow services are enabled.
sFlow agent IP address: 30.30.30.2
Collector IP 10.10.10.1, UDP 6343
Polling interval is 20 seconds.
Configured default sampling rate: 1 per 2048 packets.
0 UDP packets exported
0 sFlow samples collected.
sFlow ports
Syntax: show sflow
This command shows the following information.
TABLE 170
This field...
sFlow services
sFlow agent IP address
Collector
Polling interval
Configured default sampling rate
UDP packets exported
sFlow samples collected
sFlow ports
Global Sample Rate
BigIron RX Series Configuration Guide
53-1002253-01
Global Sample Rate
3/1
2048
3/2
2048
3/3
2048
3/4
2048
sFlow information
Displaying sFlow information
Port Sample Rate
2048
2048
2048
2048
Displays...
The feature state, which can be one of the following:
disabled
enabled
The IP address that sFlow is using in the agent_address field of packets
sent to the collectors. Refer to
The collector information. The following information is displayed for
each collector:
IP address
UDP port
If more than one collector is configured, the line above the collectors
indicates how many have been configured.
The port counter polling interval.
The configured global sampling rate. If you changed the global sampling
rate, the value you entered is shown here. The actual rate calculated by
the software based on the value you entered is listed on the next line,
"Actual default sampling rate".
The number of sFlow export packets the device has sent.
NOTE: Each UDP packet can contain multiple samples.
The number of sampled packets that have been sent to the collectors.
The ports on which you enabled sFlow.
The global sampling rate for the device.
Hardware Sample Rate
2048
2048
2048
2048
"Source address"
on page 1039.
39
1047

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents