Dell PowerConnect B-RX Configuration Manual page 298

7
Displaying IP information
TABLE 51
This field...
bootp-relay-max-hops
router-id
enabled
disabled
Static routes
Index
IP Address
Subnet Mask
Next Hop Router
Metric
Distance
Policies
Index
Action
Source
Destination
Protocol
222
CLI display of global IP configuration information (Continued)
Displays...
The maximum number of hops away a BootP server can be located from the
Brocade router and still be used by the router's clients for network booting.
To change this value, refer to
BootP relay server"
The 32-bit number that uniquely identifies the Brocade router.
By default, the router ID is the numerically lowest IP interface configured on
the router. To change the router ID, refer to
page 182.
The IP-related protocols that are enabled on the router.
The IP-related protocols that are disabled on the router.
The row number of this entry in the IP route table.
The IP address of the route's destination.
The network mask for the IP address.
The IP address of the router interface to which the Brocade router sends
packets for the route.
The cost of the route. Usually, the metric represents the number of hops to
the destination.
The administrative distance of the route. The default administrative distance
for static IP routes in Brocade routers is 1.
To list the default administrative distances for all types of routes or to
change the administrative distance of a static route, refer to
administrative distances"
The policy number. This is the number you assigned the policy when you
configured it.
The action the router takes if a packet matches the comparison values in
the policy. The action can be one of the following:
•
deny – The router drops packets that match this policy.
•
permit – The router forwards packets that match this policy.
The source IP address the policy matches.
The destination IP address the policy matches.
The IP protocol the policy matches. The protocol can be one of the following:
•
ICMP
•
IGMP
•
IGRP
•
OSPF
•
TCP
•
UDP
"Changing the maximum number of hops to a
on page 220.
"Changing the router ID"
on page 767.
BigIron RX Series Configuration Guide
on
"Changing
53-1002253-01