Qos Profiles - Dell PowerConnect B-RX Configuration Manual

18
Configuring multicast traffic engineering
•
•
•
•
•
•

Qos profiles

The 16 x 10GE module uses QOS profiles to define the QOS treatment applied to packets. Each 16
x 10GE module has 16 different QOS profiles that are used on the traffic coming from the network
ports. The profiles include traffic class and drop precedence. Each port will have the following QOS
profiles.
1. TCx (low priority), DP1
2. TCx (low priority), DP0
3. TCx (high priority), DP1
4. TCx (high priority), DP0
Table 98
TABLE 98
Index
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
500
Virtual interface subsets are not supported for engress ACLs.
The egress filtering of the 16x10 module only compares to 3 bits of TOS field (delay,
throughput, reliability).
The 16 x10 GE module consists of 4 port groups of 4 ports each: Port group 1: ports 1,5,9,13
Port group 2: ports 2,6,10,14
Port group 3: ports 3,7,11,15
Port group 4: ports 4,8,12,16
represents the QOS profiles required for the ingress direction.
QOS profile table
TC DP Associated port (Network Port
1 = 0)
0 1 0 or 4
1 1 1 or 5
2 1 2 or 6
3 1 3 or 7
0 0 0 or 4
1 0 1 or 5
2 0 2 or 6
3 0 3 or 7
4 1 0 or 4
5 1 1 or 5
6 1 2 or 6
7 1 3 or 7
4 0 0 or 4
5 0 1 or 5
6 0 2 or 6
7 0 3 or 7
QOS profile
Low priority TC DP1 (default)
Low priority TC DP1 (default)
Low priority TC DP1 (default)
Low priority TC DP1 (default)
Low priority TC DP0
Low priority TC DP0
Low priority TC DP0
Low priority TC DP0
High priority TC DP1
High priority TC DP1
High priority TC DP1
High priority TC DP1
High priority TC DP0 (Network control)
High priority TC DP0 (Network control)
High priority TC DP0 (Network control)
High priority TC DP0 (Network control)
BigIron RX Series Configuration Guide
53-1002253-01