31
Displaying multi-device port authentication information
You can specify from 1 – 65535 seconds. The default is 120 seconds.
Displaying multi-device port authentication information
You can display the following information about the multi-device port authentication configuration:
•
•
•
•
•
•
Displaying authenticated MAC address information
To display information about authenticated MAC addresses on the ports where the multi-device
port authentication feature is enabled, enter the following command.
BigIron RX# show auth-mac-address
----------------------------------------------------------------------
Port
----------------------------------------------------------------------
1/18
1/20
1/22
4/5
Syntax: show auth-mac-address
The following table describes the information displayed by the show auth-mac-address command.
TABLE 148
This field...
Port
Vlan
Accepted MACs
Rejected MACs
Attempted-MACs
Displaying multi-device port authentication configuration
information
To display a summary of multi-device port authentication that have been configured on the device,
enter the following command.
936
Information about authenticated MAC addresses
Information about the multi-device port authentication configuration
Authentication Information for a specific MAC address or port
Multi-device port authentication settings and authenticated MAC addresses for each port
where the multi-device port authentication feature is enabled
The MAC addresses that have been successfully authenticated
The MAC addresses for which authentication was not successful
Accepted MACs
Rejected MACs
1
0
0
0
Output from the show auth-mac-address command
100
0
0
0
Displays...
The port number where the multi-device port authentication feature is
enabled.
The VLAN to which the port has been assigned.
The number of MAC addresses that have been successfully
authenticated
The number of MAC addresses for which authentication has failed.
The rate at which authentication attempts are made for MAC addresses.
BigIron RX Series Configuration Guide
53-1002253-01