Dell PowerConnect B-RX Configuration Manual page 912

26
Displaying BGP4 information
TABLE 126
This field...
TCP Connection state
Byte Sent
Byte Received
Local host
Local port
Remote host
Remote port
ISentSeq
SendNext
TotUnAck
TotSent
ReTrans
UnAckSeq
IRcvSeq
RcvNext
SendWnd
836
BGP4 neighbor information (Continued)
Displays...
The state of the connection with the neighbor. The connection can have
one of the following states:
•
•
•
•
•
•
•
•
•
•
•
The number of bytes sent.
The number of bytes received.
The IP address of the device.
The TCP port the device is using for the BGP4 TCP session with the
neighbor.
The IP address of the neighbor.
The TCP port the neighbor is using for the BGP4 TCP session with the
device.
The initial send sequence number for the session.
The next sequence number to be sent.
The number of sequence numbers sent by the device that have not been
acknowledged by the neighbor.
The number of sequence numbers sent to the neighbor.
The number of sequence numbers that the device retransmitted
because they were not acknowledged.
The current acknowledged sequence number.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the send window.
LISTEN – Waiting for a connection request.
SYN-SENT – Waiting for a matching connection request after having
sent a connection request.
SYN-RECEIVED – Waiting for a confirming connection request
acknowledgment after having both received and sent a connection
request.
ESTABLISHED – Data can be sent and received over the
connection. This is the normal operational state of the connection.
FIN-WAIT-1 – Waiting for a connection termination request from the
remote TCP, or an acknowledgment of the connection termination
request previously sent.
FIN-WAIT-2 – Waiting for a connection termination request from the
remote TCP.
CLOSE-WAIT – Waiting for a connection termination request from
the local user.
CLOSING – Waiting for a connection termination request
acknowledgment from the remote TCP.
LAST-ACK – Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination
request).
TIME-WAIT – Waiting for enough time to pass to be sure the remote
TCP received the acknowledgment of its connection termination
request.
CLOSED – There is no connection state.
BigIron RX Series Configuration Guide
53-1002253-01