Mib Support; Syslog Messages; Web Management; Configuring Lldp - Dell PowerConnect B-RX Configuration Manual

•
•
The LLDPDU format is shown in
The TTL TLV format is shown below.
FIGURE 19

MIB support

Brocade devices support the following standard MIB modules:
•
•
•

Syslog messages

Syslog messages for LLDP provide management applications with information related to MIB data
consistency and general status. These Syslog messages correspond to the lldpRemTablesChange
SNMP notifications.

Web Management

<<Not currently supported>>

Configuring LLDP

This section describes how to enable and configure LLDP.
Table 61
BigIron RX Series Configuration Guide
53-1002253-01
If the TTL field has a value other than zero, the receiving LLDP agent is notified to completely
replace all information associated with the LLDP agent or port with the information in the
received LLDPDU.
If the TTL field value is zero, the receiving LLDP agent is notified that all system information
associated with the LLDP agent or port is to be deleted. This TLV may be used, for example, to
signal that the sending port has initiated a port shutdown procedure.
TTL TLV packet format
TLV Type = 3 TLV Information
String Length = 2
7 bits 9 bits
LLDP-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
lists the LLDP global-level tasks and the default behavior/value for each task.
"LLDPDU packet format" on page 256.
Time to Live (TTL)
2 octets
9
MIB support
259