Transparent Port Flooding - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

BigIron RX# show port security global-deny
Global deny is enabled. Configured macs/Max macs = 1/512
Count
----- ------------------ ----
Syntax: show port security global-deny
TABLE 158
This field...
Count
Deny-Src-Addr
VLAN

Transparent port flooding

When the transparent port flooding feature in enabled for a interface, all MAC learning will be
disabled for that interface. This will result in all Layer 2 traffic to be flooded to all other interfaces
within the VLAN. The Transparent port flooding feature is disabled by default. To enable
Transparent port flooding, enter a command such as the following:
BigIron RX(config-if-e1000-15/8)mac-learn-disable
Syntax: [no] mac-learn-disable
Displaying transparent port flooding status
To display if the transparent port flooding feature has been enabled, issue the show interface
ethernet <interface> or show running-configuration command.
10.45.48.50(config-if-e1000-15/8)#mac-learn-disable
10.45.48.50(config-if-e1000-15/8)#show int e 15/8
GigabitEthernet15/8 is down, line protocol is down
Hardware is GigabitEthernet, address is 0004.1234.ffff (bia 0004.1234.ffff)
Configured speed 1Gbit, actual unknown, configured duplex fdx, actual unknown
Configured mdi mode AUTO, actual unknown
Member of L2 VLAN ID 1, port is untagged, port state is Disabled
STP configured to ON, Priority is level0, flow control enabled
Force-DSCP disabled
SA learning is disabled
mirror disabled, monitor disabled
Not member of any active trunks
Not member of any configured trunks
No port name
MTU 1522 bytes, encapsulation ethernet
300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 multicasts, 0 unicasts
0 input errors, 0 CRC, 0 frame, 0 ignored
BigIron RX Series Configuration Guide
53-1002253-01
Deny-Addr Vlan
1
0030.0000.00a2 1200
Output from the show port security global-deny command
Displays...
The total number of times the MAC address was received on the device.
The denied MAC address that was received on the interface.
The VLAN on which the denied MAC address was received.
Transparent port flooding
32
961

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents