Displaying Vsrp Packet Statistics For Vsrp - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

BigIron RX# show vsrp brief
VLAN VRID ConfPri CurPri P
10
When the command is entered on a Layer 3 VSRP, it displays the following information.
BigIron RX# show vsrp brief
VLAN VRID ConfPri CurPri P State
100
101
Syntax: show vsrp brief
This field...
VLAN
VRID
ConfPri
CurPri
P
state
Peer MAC address or IP address
VIP

Displaying VSRP packet statistics for VSRP

When Layer 3 VSRP is enabled, you can enter the following command to display VSRP statistics.
BigIron RX# show vsrp statistics
Global VSRP statistics
----------------------
- received packets with checksum errors = 0
- received packets with invalid version number = 0
- received packets with unknown or inactive vrid = 43
To display VSRP statistics for a specific VLAN, enter a command such as the
following:
BigIron RX# show vsrp statistics vlan 100
BigIron RX Series Configuration Guide
53-1002253-01
10
100
80 P
1
150
1
P Initia xxxx.1414.1404 20.20.20.4
2
50
1
P Initia xxxx.1e1e.1e01 30.30.30.1
State
PeerMacAddr or IpAddress
Master
Unknown
PeerMacAddr or IpAddress
Displays...
The VLAN on which VSRP is configured.
The VRID for which the following information is displayed.
The configured priority for the device's preferability for becoming the Master
for the VRID.
The device's current priority for becoming the Master.
Pre-empt mode status:
P – pre-emption is enabled for the VLAN
N – pre-emption is disabled for the VLAN
This device's VSRP state for the VRID. The state can be one of the following:
initialize – VSRP is not enabled on the VRID. If the state remains
"initialize" after you enable VSRP on the VRID, make sure that the VRID
is also configured on the other routers and that the routers can
communicate with each other.
NOTE: If the state is "initialize" and the mode is incomplete, make sure you
have specified the IP address for the VRID.
standby – This device is a Backup for the VRID.
master – This device is the Master for the VRID.
MAC address or IP address of the peer.
Virtual IP address for the VLAN.
Displaying VSRP information
VIP
Unknown
None
VIP
20.20.20.100
30.30.30.100
15
445

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents