Dell PowerConnect B-RX Configuration Manual page 720

23
Configuring MSDP mesh groups
TABLE 106
This field...
Keep Alive Message Received
Notifications Sent
Notifications Received
Source-Active Sent
Source-Active Received
Last Connection Reset Reason
Notification Message Error Code
Received
Notification Message Error SubCode
Received
Notification Message Error Code
Transmitted
Notification Message Error SubCode
Transmitted
TCP statistics
644
MSDP peer information (Continued)
Displays...
The number of Keep Alive messages the MSDP router has received from
the peer.
The number of Notification messages the MSDP router has sent to the
peer.
The number of Notification messages the MSDP router has received
from the peer.
The number of Source Active messages the MSDP router has sent to the
peer.
The number of Source Active messages the MSDP router has received
from the peer.
The reason the previous session with this neighbor ended.
If the MSDP router receives a NOTIFICATION messages from the
neighbor, the message contains an error code corresponding to one of
the following errors. Some errors have subcodes that clarify the reason
for the error. Where applicable, the subcode messages are listed
underneath the error code messages.
•
•
•
•
•
•
•
For information about these error codes, see section 17 in the Internet
draft describing MSDP, "draft-ietf-msdp-spec".
See above.
The error message corresponding to the error code in the NOTIFICATION
message this MSDP router sent to the neighbor. See the description for
the Notification Message Error Code Received field for a list of possible
codes.
See above.
1 – Message Header Error
2 – SA-Request Error
3 – SA-Message or SA-Response Error
4 – Hold Timer Expired
5 – Finite State Machine Error
6 – Notification
7 – Cease
BigIron RX Series Configuration Guide
53-1002253-01