Displaying The Active Interfaces For A Vrid - Dell PowerConnect B-RX Configuration Manual

Displaying the active interfaces for a VRID

On a VSRP-aware device, you can display VLAN and port information for the connections to the
VSRP devices (Master and Backups) using the show vsrp aware command. The command shows
the active interfaces for the VRID. No output is displayed if the command is entered on a VSRP
master or backup.
BigIron RX# show vsrp aware
Aware port listing
VLAN ID
100
200
Syntax: show vsrp aware
This display shows the following information when you use the aware parameter. For information
about the display when you use the vrid <num> or vlan <vlan-id> parameter, refer to
VRID information"
TABLE 82
This field...
VLAN ID
VRID
Last Port
BigIron RX Series Configuration Guide
53-1001810-01
VRID Last Port
1 3/2
2 4/1
on page 429.
CLI display of VSRP-aware information
Displays...
The VLAN that contains the VSRP-aware device's connection with the VSRP
Master and Backups.
The VRID.
The most recent active port connection to the VRID. This is the port
connected to the current Master. If a failover occurs, the VSRP-aware device
changes the port to the port connected to the new Master. The VSRP-aware
device uses this port to send and receive data through the backed up node.
Displaying VSRP information
15
"Displaying
433