Configuration Rules - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

11
Configuring 802.1q tag-type translation
Figure 29
tag-types between devices match, and the core devices have multiple tag-types. In this example,
the tag-type translation feature integrates packets that have single and double tag-types.
FIGURE 29
Path A
Path B
As illustrated in
For more information, refer to

Configuration rules

304
shows a more complex example application in which some ports are untagged, not all
802.1q tag-type translation configuration example 2
Global 802.1Q
T
tag-type
U
8500
Edge Switch 1
Incoming Frame
on Core Switch 1
DA SA 8500 Customer
DA SA 8200 Customer
Figure
29, the devices process the packets as follows:
Path A: When Core Switch 1 receives the tagged packet from Edge Switch 1, it keeps the 8500
tag-type in the frame header (because the incoming port on Core Switch 1 is untagged) and
adds the 9100 tag-type as it sends the packet to the uplink (Core Switch 2). In this case, the
packet is double-tagged as it travels between the core devices.
Path B: When Core Switch 1 receives the tagged packet from Edge Switch 2, it removes the
8200 tag-type and replaces (translates) it with the 9100 tag-type as it sends the packet to the
uplink (Core Switch 2).
On the supported devices, you configure 802.1q tag-types per port region. Use the show
running-config command at any level of the CLI to view port regions. Note that on Gigabit
Ethernet modules, ports 1 and 2 belong to the same port region.
Edge Switch 2
Global 802.1Q
tag-type
8200
8200
T
T
8200
Multiple
T
T
802.1Q
tag-types
T
8300
Core Switch 1
Outgoing Frame
on Core Switch 1
Provider
DA SA 9100
8500
VLAN
VLAN
DA SA 9100 Provider
VLAN
VLAN
"Configuring 802.1q tag-type translation"
Edge Switch 3
Global 802.1Q
tag-type
8200
8200
T
T
8200
Multiple
T
802.1Q
tag-types
U
8300
Core Switch 2
Outgoing Frame
on Core Switch 2
DA SA 8500 Customer
VLAN
DA SA 8200 Customer
VLAN
Legend:
T - Tagged port
U - Untagged port
-
XXXX
Path A
Path B
on page 302.
BigIron RX Series Configuration Guide
Global 802.1Q
tag-type
8500
Edge Switch 4
DMA or port group
53-1001810-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents