Dell PowerConnect B-RX Configuration Manual page 712

23
Configuring MSDP mesh groups
TABLE 102
This field...
Keep Alive Message Received
Notifications Sent
Notifications Received
Source-Active Sent
Source-Active Received
Last Connection Reset Reason
Notification Message Error Code Received
Notification Message Error SubCode
Received
Notification Message Error Code
Transmitted
Notification Message Error SubCode
Transmitted
TCP statistics
640
MSDP peer information (Continued)
Displays...
The number of Keep Alive messages the MSDP router has received
from the peer.
The number of Notification messages the MSDP router has sent to
the peer.
The number of Notification messages the MSDP router has received
from the peer.
The number of Source Active messages the MSDP router has sent
to the peer.
The number of Source Active messages the MSDP router has
received from the peer.
The reason the previous session with this neighbor ended.
If the MSDP router receives a NOTIFICATION messages from the
neighbor, the message contains an error code corresponding to one
of the following errors. Some errors have subcodes that clarify the
reason for the error. Where applicable, the subcode messages are
listed underneath the error code messages.
•
1 – Message Header Error
•
2 – SA-Request Error
•
3 – SA-Message or SA-Response Error
•
4 – Hold Timer Expired
•
5 – Finite State Machine Error
•
6 – Notification
•
7 – Cease
For information about these error codes, see section 17 in the
Internet draft describing MSDP, "draft-ietf-msdp-spec".
See above.
The error message corresponding to the error code in the
NOTIFICATION message this MSDP router sent to the neighbor. See
the description for the Notification Message Error Code Received
field for a list of possible codes.
See above.
BigIron RX Series Configuration Guide
53-1001810-01