Displaying Temperature Information; Displaying Switchover Information - Dell PowerConnect B-RX Configuration Manual

3
Monitoring management module redundancy
The Status column indicates the module status. The management modules can have one of the
following status:
•
•

Displaying temperature information

Each management module contains a temperature sensor. By default, the BigIron RX system polls
the temperature of each management module every 60 seconds. You can display the current
temperature of the management modules (and all other modules) by entering the following
command at any CLI level.
BigIron RX# show chassis
...
Active Mgmt Module: 28.43C 57.500C (CPU)
Standby Mgmt Module: 29.15C
Temperature Monitoring Poll Period is 60 seconds
...
Syntax: show chassis
The output displays the temperature of the management modules in the BigIron RX chassis and
also indicates that the temperature readings were provided within the last 60 seconds.

Displaying switchover information

You can display the following related to a switchover:
•
•
36
ACTIVE – The module is currently the active management module.
STANDBY – The module is the standby management module. The status of the standby module
can be one of the following:
•
Init – The module is currently initializing as the standby module.
•
Ready – The module is ready to take over as the active module, if necessary.
•
Wait – The module is awaiting boot information from the active management module.
•
Sync – The active module is currently synchronizing files between itself and the standby
module.
Redundancy parameter settings and statistics, which include the number of switchover that
have occurred.
System log or the traps logged on an SNMP trap receiver, which includes Information about
whether a switchover has occurred.
57.500C (CPU)...
BigIron RX Series Configuration Guide
53-1001810-01