Dell PowerConnect B-RX Configuration Manual page 116

3
Flash memory and PCMCIA flash card file management commands
The software displays the directory of the file system that has the current management focus. By
default, flash memory has the management focus. However, you do not need to change the focus
to list the files on the file system that does not currently have management focus. In this case, you
can specify the /<path-name>/ parameter with the dir or ls commands to display the directory of
the desired file system.
For example, to display a directory of the files in flash memory, if flash memory has the
management focus, enter the following command.
BigIron RX# dir
Directory of /flash/
07/28/2003 15:57:45
07/28/2003 15:56:10
07/28/2003 16:00:08
07/25/2003 18:00:23
00/00/0
07/28/2003 14:40:19
07/28/2003 15:18:18
07/28/2003 09:56:16
07/28/2003 15:08:12
07/28/2003 16:02:23
07/25/2003 18:02:14
07/28/2003 14:28:47
07/26/2003 12:16:29
07/25/2003 18:11:01
07/28/2003 09:40:54
Syntax: dir | ls [<path-name>]
You can enter either dir or ls for the command name.
Specify the <path-name> parameter to display the following:
•
•
For example, to list only files that contain a .tmp suffix in flash memory, if flash memory is the
current management focus, enter a command such as the following.
BigIron RX# dir *.tmp
Directory of /flash/
07/28/2003 15:57:45
07/28/2003 15:56:10
07/28/2003 16:00:08
44
00:00:00
15 File(s)
0 Dir(s)
The files that match the value for a flash memory directory, or flash card directory or
subdirectory you specify.
The files that match the value for a name you specify.
3 File(s)
0 Dir(s)
3,077,697 1060.tmp
3,077,697 14082.tmp
3,077,697 2084.tmp
292,701 boot
12 boot.ini
840,007 lp-primary-0
840,007 lp-secondary-0
391,524 monitor
3,077,697 primary
1,757 startup-config
1,178 startup.sj2
1,662 startup.spa
1,141 startup.vso
1,008 startup.vsr
1,554 startup.vsrp.ospf
14,683,339 bytes
15,990,784 bytes free
3,077,697 1060.tmp
3,077,697 14082.tmp
3,077,697 2084.tmp
9,292,701 bytes
15,990,784 bytes free
BigIron RX Series Configuration Guide
53-1001810-01