Enabling Snmp To Configure Radius; Identifying The Radius Server To The Bigiron Rx - Dell PowerConnect B-RX Configuration Manual

TABLE 36
Attribute name
foundry-command-string
foundry-command-exception-flag

Enabling SNMP to configure RADIUS

RADIUS is disabled by default. To enable SNMP access to RADIUS MIB objects on the device, enter
a command such as the following.
BigIron RX(config)#enable snmp config-radius
Syntax: [no] enable snmp <config-radius | config-tacacs>
The <config-radius> parameter specifies the RADIUS configuration mode. RADIUS is disabled by
default.
The <config-tacacs> parameter specifies the TACACS configuration mode. TACACS is disabled by
default.

Identifying the RADIUS server to the BigIron RX

To use a RADIUS server to authenticate access to a BigIron RX, you must identify the server to the
device.
Example
BigIron RX(config)# radius-server host 209.157.22.99
Syntax: radius-server host <ip-addr> | <server-name> [auth-port <number> acct-port <number>]
The host <ip-addr> | <server-name> parameter is either an IP address or an ASCII text string.
The <auth-port> parameter is the Authentication port number; it is an optional parameter. The
default is 1812.
The <acct-port> parameter is the Accounting port number; it is an optional parameter. The default
is 1813.
BigIron RX Series Configuration Guide
53-1001810-01
Brocade
vendor-specific attributes for RADIUS (Continued)
Attribute ID
2
3
Configuring RADIUS security
Data type Description
string Specifies a list of CLI commands that are
permitted or denied to the user when RADIUS
authorization is configured.
The commands are delimited by semi-colons
(;). You can specify an asterisk (*) as a
wildcard at the end of a command string.
For example, the following command list
specifies all show and debug ip commands,
as well as the write terminal command:
show *; debug ip *; write term*
integer Specifies whether the commands indicated
by the foundry-command-string attribute are
permitted or denied to the user. This attribute
can be set to one of the following:
0 Permit execution of the commands
indicated by foundry-command-string, deny
all other commands.
1 Deny execution of the commands
indicated by foundry-command-string, permit
all other commands.
4
101