Displaying Vlan Information For Specific Ports - Dell PowerConnect B-RX Configuration Manual

The output shows the following information.
TABLE 65
This field...
Configured PORT-VLAN entries
Maximum PORT-VLAN entries: 4095
Default PORT-VLAN id
PORT-VLAN
Name
Priority Level
L2 protocols
Untagged/Tagged Ports
(protocol-based VLANs)

Displaying VLAN information for specific ports

To determine which VLANs a port is a member of, enter the following command.
BigIron RX# show vlan e 4/1
Port 4/1 is a member of 2 VLANs
VLANs 1 100
Syntax: show vlan ethernet <slot-number>/<port-number> [| [begin <expression> | exclude
The ethernet <slot-number>/<port-number> parameter specifies a port. The command lists all
the VLAN memberships for the port.
The output shows the following information.
TABLE 66
This field...
Port <slot-number>/<port-number> is
a member of # VLANs
VLANs
BigIron RX Series Configuration Guide
53-1001810-01
Output of show vlan
<expression> | include <expression>]
Output of show vlan ethernet
Displaying VLAN information
Displays...
Number of port-based VLANs in the configuration.
Maximum number of port-based VLANs that you can configure. Note
however, IDs 4091 and 4092 are reserved for control purposes.
ID of the default VLAN.
ID of the port-based VLAN
Name of the port-based VLAN. [None] appears if a name has not been
assigned.
Priority level assigned to the port-based VLAN
Layer 2 control protocol configured on the VLAN
ID of the untagged or tagged ports that are members of the VLAN
If protocol based VLANs are configured, their type and name appear
after the list of ports.
Displays...
The number of VLANs a port is a member of.
The IDs of the VLANs that the port is a member of.
11
315