Displaying Ospf Neighbor Information - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

TABLE 109
This field...
LSA
Chksum(Hex)

Displaying OSPF neighbor information

To display OSPF neighbor information, enter the following command at any CLI level.
BigIron RX# show ip ospf neighbor
Port
v10
v11
v12
v13
v14
To display OSPF neighbor information by area, enter a command such as the following.
BigIron RX# show ip ospf neighbor area 1
Port
v10
Syntax: show ip ospf neighbor [router-id <ip-addr>] | [<num>] [area <ip-addr> | <num> ]
The router-id <ip-addr> parameter displays only the neighbor entries for the specified router.
The <num> parameter displays only the entry in the specified index position in the neighbor table.
For example, if you enter "1", only the first entry in the table is displayed.
These displays show the following information.
TABLE 110
Field
Port
Address
Pri
BigIron RX Series Configuration Guide
53-1001810-01
CLI display of OSPF area information (Continued)
Address
Pri
10.1.10.1
1
10.1.11.1
1
10.1.12.1
1
10.1.13.1
1
10.1.14.1
1
Address
Pri
10.1.10.1
1
CLI display of OSPF neighbor information
Description
The port through which the BigIron RX is connected to the neighbor.
The IP address of this BigIron RX's interface with the neighbor.
The OSPF priority of the neighbor:
For multi-access networks, the priority is used during election of the Designated Router
(DR) and Backup designated Router (BDR).
For point-to-point links, this field shows one of the following values:
1 = point-to-point link
3 = point-to-point link with assigned subnet
Displaying OSPF information
Displays...
The LSA number.
The checksum for the LSA packet. The checksum is based on all the
fields in the packet except the age field. The BigIron RX uses the
checksum to verify that the packet is not corrupted.
State
Neigh Address
FULL/DR
10.1.10.2
FULL/DR
10.1.11.2
FULL/DR
10.1.12.2
FULL/DR
10.1.13.2
FULL/DR
10.1.14.2
State
Neigh Address
FULL/DR
10.1.10.2
Neigh ID
Ev Op Cnt
10.65.12.1
5
2
10.65.12.1
5
2
10.65.12.1
5
2
10.65.12.1
5
2
10.65.12.1
5
2
Neigh ID
Ev Op Cnt
10.65.12.1
5
2
25
0
0
0
0
0
0
721

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents