Displaying Peer Information - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

Displaying peer information

To display MSDP peer information, use the following CLI method.
BigIron RX# show ip msdp peer
1
Syntax: show ip msdp peer
This display shows the following information.
TABLE 102
This field...
Total number of MSDP peers
IP Address
State
Keep Alive Time
Hold Time
Keep Alive Message Sent
BigIron RX Series Configuration Guide
53-1001810-01
Total number of MSDP Peers: 2
IP Address
206.251.17.30
Keep Alive Time
Hold Time
60
90
Keep Alive
Notifications
Source-Active
Last Connection Reset Reason:Reason Unknown
Notification Message Error Code Received:Unspecified
Notification Message Error SubCode Received:Not Applicable
Notification Message Error Code Transmitted:Unspecified
Notification Message Error SubCode Transmitted:Not Applicable
TCP Connection state: ESTABLISHED
Local host:
206.251.17.29, Local
Remote host: 206.251.17.30, Remote Port: 639
ISentSeq:
16927
SendWnd:
16384
IRcvSeq:
45252428
TotalRcv:
10
MSDP peer information
Configuring MSDP mesh groups
State
ESTABLISHED
Message Sent
2
0
0
Port: 8270
SendNext:
685654
TotSent:
668727
RcvNext:
45252438
RcvQue:
Displays...
The number of MSDP peers configured on the device
The IP address of the peer's interface with the device
The state of the MSDP router's connection with the peer. The state
can be one of the following:
CONNECTING – The session is in the active open state.
ESTABLISHED – The MSDP session is fully up.
INACTIVE – The session is idle.
LISTENING – The session is in the passive open state.
The keep alive time, which specifies how often this MSDP router
sends keep alive messages to the neighbor. The keep alive time is
60 seconds and is not configurable.
The hold time, which specifies how many seconds the MSDP router
will wait for a KEEPALIVE or UPDATE message from an MSDP
neighbor before deciding that the neighbor is dead. The hold time is
90 seconds and is not configurable.
The number of Keep Alive messages the MSDP router has sent to
the peer.
Message Received
3
0
640
TotUnAck:
ReTrans:
RcvWnd:
16384
0
SendQue:
23
0
1
0
639

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents