Dell PowerConnect B-RX Configuration Manual page 163

Example
user=bob {
default service = permit
member admin
# Global password
global = cleartext "cat"
service = exec {
}
The attribute name in the A-V pair is not significant; the device uses the last one that has a numeric
value. However, the device interprets the value for a non-"foundry-privlvl" A-V pair differently than it
does for a "foundry-privlvl" A-V pair. The following table lists how the deviceassociates a value from
a non-"foundry-privlvl" A-V pair with a Brocade privilege level.
TABLE 34
Value for non-"foundry-privlvl" A-V pair
15
From 14 – 1
Any other number or 0
In the example above, the A-V pair configured for the Exec service is
uses the value in this A-V pair to set the user's privilege level to 0 (super-user), granting the user full
read-write access.
In a configuration that has both a "foundry-privlvl" A-V pair and a non-"foundry-privlvl" A-V pair for
the Exec service, the non-"foundry-privlvl" A-V pair is ignored.
Example
user=bob {
default service = permit
member admin
# Global password
global = cleartext "cat"
service = exec {
}
In this example, the user would be granted a privilege level of 4 (port-config level). The
A-V pair is ignored by the device.
15
If the TACACS+ server has no A-V pair configured for the Exec service, the default privilege level of 5
(read-only) is used.
Configuring command authorization
When TACACS+ command authorization is enabled, the device consults a TACACS+ server to get
authorization for commands entered by the user.
BigIron RX Series Configuration Guide
53-1001810-01
privlvl = 15
}
Foundry equivalents for non-"foundry-privlvl" A-V pair values
foundry-privlvl = 4
privlvl = 15
}
Configuring TACACS/TACACS+ security
Foundry privilege level
0 (super-user)
4 (port-config)
5 (read-only)
privlvl = 15
4
. The device
privlvl =
91