Displaying Ospf External Link State Information - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.7.02
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

In this example, four routes have been redistributed. Three of the routes were redistributed from
static IP routes and one route was redistributed from a directly connected IP route.
Syntax: show ip ospf redistribute route [<ip-addr> <ip-mask>]
The <ip-addr> <ip-mask> parameter specifies a network prefix and network mask. Here is an
example.
BigIron RX# show ip ospf redistribute route 3.1.0.0 255.255.0.0
3.1.0.0 255.255.0.0 static

Displaying OSPF external link state Information

To display external link state information, enter the following command at any CLI level.
BigIron RX>#show ip ospf database external-link-state
Index Aging
1
2
3
4
5
6
7
Syntax: show ip ospf database external-link-state [advertise <num>] | [extensive] | [link-state-id
The advertise <num> parameter displays the hexadecimal data in the specified LSA packet. The
<num> parameter identifies the LSA packet by its position in the router's External LSA table. To
determine an LSA packet's position in the table, enter the show ip ospf external-link-state
command to display the table.
The extensive option displays the LSAs in decrypted format.
NOTE
You cannot use the extensive option in combination with other display options. The entire database
is displayed.
The link-state-id <ip-addr> parameter displays the External LSAs for the LSA source specified by
<IP-addr>.
The router-id <ip-addr> parameter shows the External LSAs for the specified OSPF router.
The sequence-number <num(Hex)> parameter displays the External LSA entries for the specified
hexadecimal LSA sequence number.
This display shows the following information.
TABLE 113
This field...
Index
Aging
LS ID
BigIron RX Series Configuration Guide
53-1001810-01
LS ID
591
10.65.13.0
591
10.65.16.0
591
10.65.14.0
591
10.65.17.0
592
10.65.12.0
592
10.65.15.0
592
10.65.18.0
<ip-addr>] | [router-id <ip-addr>] | [sequence-number <num(Hex)>] | [status <num>]
CLI display of OSPF external link state information
Displaying OSPF information
Router
Netmask
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
10.65.12.1
ffffff00 8000000a
Displays...
ID of the entry
The age of the LSA, in seconds.
The ID of the link-state advertisement from which the BigIron RX learned
this route.
Metric
Flag
0000
0000
0000
0000
0000
0000
0000
25
727

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade dcx-4sBrocade dcx

Table of Contents