Dell PowerConnect B-RX Configuration Manual page 909

TABLE 122
This field...
NLRIs Sent in Update Message
Peer Out of Memory Count for
Displaying advertised routes
To display the routes the device has advertised to a specific neighbor for a specific network, enter a
command such as the following at any level of the CLI.
BigIron RX# show ip bgp neighbors 192.168.4.211 advertised-routes
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST I:IBGP L:LOCAL
1
2
You also can enter a specific route, as in the following example.
BigIron RX# show ip bgp neighbors 192.168.4.211 advertised 200.1.1.0/24
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST I:IBGP L:LOCAL
1
Syntax: show ip bgp neighbor <ip-addr> advertised-routes [<ip-addr>/<prefix>]
For information about the fields in this display, refer to
display also appear in the show ip bgp display.
Displaying the routes whose destinations are unreachable
To display BGP4 routes whose destinations are unreachable using any of the BGP4 paths in the
BGP4 route table, enter a command such as the following at any level of the CLI.
BigIron RX(config-bgp)# show ip bgp neighbor 192.168.4.211 routes unreachable
Syntax: show ip bgp neighbor <ip-addr> routes unreachable
For information about the fields in this display, refer to
display also appear in the show ip bgp display.
BigIron RX Series Configuration Guide
53-1001810-01
BGP4 route summary information for a neighbor (Continued)
There are 2 routes advertised to neighbor 192.168.4.211
Network Next Hop
102.0.0.0/24 192.168.2.102
200.1.1.0/24 192.168.2.102
Network Next Hop
200.1.1.0/24 192.168.2.102
Displaying BGP4 information
Displays...
The number of NLRIs for new routes the BigIron RX has sent to this
neighbor in UPDATE messages.
•
Withdraws – The number of routes the BigIron RX has sent to the
neighbor to withdraw.
•
Replacements – The number of routes the BigIron RX has sent to
the neighbor to replace routes the neighbor already has.
Statistics for the times the BigIron RX has run out of BGP4 memory for
the neighbor during the current BGP4 session.
•
Receiving Update Messages – The number of times UPDATE
messages were discarded because there was no memory for
attribute entries.
•
Accepting Routes(NLRI) – The number of NLRIs discarded because
there was no memory for NLRI entries. This count is not included in
the Receiving Update Messages count.
•
Attributes – The number of times there was no memory for BGP4
attribute entries.
•
Outbound Routes(RIB-out) – The number of times there was no
memory to place a "best" route into the neighbor's route
information base (Adj-RIB-Out) for routes to be advertised.
Metric LocPrf
12
0
Metric LocPrf
0
Table 124
Table 124
Weight Status
32768 BL
32768 BL
Weight Status
32768 BL
on page 842. The fields in this
on page 842. The fields in this
26
837