Dell PowerConnect B-RX Configuration Manual page 60

Layer 3 enhancements
TABLE 14
Enhancement
OSPF NBMA
Layer 3 VSRP
VSRP Delay Link Events
IPv6 Hardware Forwarding
OSPF v3
BGP+
RIPng
ACL Duplication Check
IPv6 ACLs
lx
Layer 3 enhancements
Description
You can configure an interface to send OSPF
unicast packets rather than broadcast packets to
its neighbor by configuring non-broadcast
multi-access (NBMA) networks.
VSRP redundancy and sub-second failover for
Layer 3 topologies is available in this release.
This is a new VSRP command that will delay the
sending of port "up"/"down" events.
Forwarding for Layer 3 IP switching technology for
the forwarding of IPv6 packets.See the
"Configuring Basic IPv6 Connectivity" chapter of
the BigIron RX Series Configuration Guide.
IPv6 supports OSPF version 3 (OSPFv3), which
functions similarly to OSPF version 2.
Brocade's implementation of IPv6 supports multi
protocol BGP (MBGP) extensions, which allow
IPv6 BGP (known as BGP4+) to distribute routing
information for protocols such as IPv4 BGP.
IPv6 RIP, known as Routing Information Protocol
Next Generation or RIPng, functions similarly to
IPv4 RIP version 2. RIPng supports IPv6
addresses and prefixes.
The acl-duplication-check command has been
changed to acl-duplication-check-disable. With
this command, software checking for duplicate
ACL entries will be disabled after an upgrade.
In this release you can use an IPv6 ACL to provide
input to other features such as route maps and
distribution lists.
See...
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring
OSPF Version 2 (IPv4)"
Section:"Configuring an
OSPF non-broadcast
interface"
Book: BigIron RX Series
Configuration Guide
Chapter: "Virtual Switch
Redundancy Protocol
(VSRP)"
Section:"Enabling Layer 3
VSRP"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring
Interface Parameters"
Section:"Port transition
hold timer"
Book: BigIron RX Series
Configuration Guide
Chapter:"Configuring
Basic IPv6 Connectivity"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring
OSPF Version 3"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring
BGP4+"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring
RIPng"
Book: BigIron RX Series
Configuration Guide
Chapter: "Access Control
List"
Section:"Enabling ACL
duplication check"
Book: BigIron RX Series
Configuration Guide
Chapter: "IPv6 Access
Control Lists (ACLs)"
BigIron RX Series Configuration Guide
53-1001810-01