Dell PowerConnect B-RX Configuration Manual page 713

TABLE 102
This field...
TCP connection state
Local host
Local port
Remote host
Remote port
ISentSeq
SendNext
TotUnAck
SendWnd
TotSent
ReTrans
IRcvSeq
RcvNext
RcvWnd
TotalRcv
BigIron RX Series Configuration Guide
53-1001810-01
MSDP peer information (Continued)
Configuring MSDP mesh groups
Displays...
The state of the connection with the neighbor. The connection can
have one of the following states:
•
LISTEN – Waiting for a connection request.
•
SYN-SENT – Waiting for a matching connection request after
having sent a connection request.
•
SYN-RECEIVED – Waiting for a confirming connection request
acknowledgment after having both received and sent a
connection request.
•
ESTABLISHED – Data can be sent and received over the
connection. This is the normal operational state of the
connection.
•
FIN-WAIT-1 – Waiting for a connection termination request
from the remote TCP, or an acknowledgment of the connection
termination request previously sent.
•
FIN-WAIT-2 – Waiting for a connection termination request
from the remote TCP.
•
CLOSE-WAIT – Waiting for a connection termination request
from the local user.
•
CLOSING – Waiting for a connection termination request
acknowledgment from the remote TCP.
•
LAST-ACK – Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination
request).
•
TIME-WAIT – Waiting for enough time to pass to be sure the
remote TCP received the acknowledgment of its connection
termination request.
•
CLOSED – There is no connection state.
The IP address of the MSDP router's interface with the peer.
The TCP port the MSDP router is using for the BGP4 TCP session
with the neighbor.
The IP address of the neighbor.
The TCP port number of the peer end of the connection.
The initial send sequence number for the session.
The next sequence number to be sent.
The number of sequence numbers sent by the MSDP router that
have not been acknowledged by the neighbor.
The size of the send window.
The number of sequence numbers sent to the neighbor.
The number of sequence numbers that the MSDP router
retransmitted because they were not acknowledged.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the receive window.
The number of sequence numbers received from the neighbor.
23
641