4.4.4 LACP Setting
This page is used to configure the LACP system priority setting. The LACP Setting screens in
appear.
The page includes the following fields:
Object
•
System Priority
Buttons
: Click to apply changes.
The page includes the following fields:
Object
•
System Priority
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in
Figure 4-4-8 LACP Setting Page Screenshot
Description
A value which is used to identify the active LACP.
The Managed Switch with the lowest value has the highest priority and is
selected as the active LACP peer of the trunk group.
Figure 4-4-9 LACP Information Page Screenshot
Description
Display the current system priority.
Figure 4-4-10 LACP Port Setting Page Screenshot
136
User's Manual of WGS Managed Series
Figure 4-4-8
Figure 4-4-10
&
Figure 4-4-11
&
Figure 4-4-9
appear.