Lacp Configuration - Planet GS-5220 Series User Manual

Group ID
•
Port Members
•
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.5.2 LACP Configuration

Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports
located on a different device. LACP allows switches connected to each other to discover automatically whether
any ports are member of the same LAG.
This page allows the user to inspect the current LACP port configurations, and possibly change them as well. The
LACP Configuration screen in
Indicates the group ID for the settings contained in the same row.
Group ID "Normal" indicates there is no aggregation. Only one group ID
is valid per port.
Each switch port is listed for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove
the port from the aggregation. By default, no ports belong to any
aggregation group.
Figure 4-5-4 appears.
User's Manual of GS-5220 LCD Series
179