Lacp Setting - Planet WGS-4215-T User Manual

• Duplex
• Flow Control Config
• Flow Control Status

4.4.4 LACP Setting

This page is used to configure the LACP system priority setting. The LACP Setting screens in
appear.
The page includes the following fields:
Object
•
System Priority
Buttons
: Click to apply changes.
The page includes the following fields:
Object
•
System Priority
Display the current duplex mode
Display the current flow control configuration
Display the current flow control status
Figure 4-4-8 LACP Setting Page Screenshot
Description
A value which is used to identify the active LACP.
The Managed Switch with the lowest value has the highest priority and is
selected as the active LACP peer of the trunk group.
Figure 4-4-9 LACP Information Page Screenshot
Description
Display the current system priority.
119
User's Manual of WGS Managed Series
Figure 4-4-8 & Figure 4-4-9