Disable Slb Failover Manual-Failback - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

disable slb failover manual-failback

Disables manual failback.

Syntax Description

This command has no arguments or variables.

Manual failback is disabled by default.

Usage Guidelines

To enable manual failback, use the following command:

enable slb failover manual-failback

The following command disables manual failback:

disable slb failover manual-failback

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all "i" series platforms.

ExtremeWare Software 7.0.0 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.0.0