Extreme Networks ExtremeWare Command Reference Manual page 143

• The default groups defined (permanent) are v1v2c_ro for security names snmpv1 and snmpv2c,
v1v2c_rw for security names snmpv1 and snmpv2c, admin for security name admin, and initial for
security names initial, initialmd5, initialsha, initialmd5Priv and initialshaPriv.
• The default access defined (permanent) are admin, initial, v1v2c_ro, v1v2c_rw, and v1v2cNotifyGroup.
Example
In the following command, access for the group defaultROGroup is created with all the default values:
security model
defaultUserView, and storage nonvolatile.
configure snmpv3 add access defaultROGroup
In the following command, access for the group defaultROGroup is created with the values: security
model , security level
USM
view defaultAdminView, and storage nonvolatile.
configure snmpv3 add access defaultROGroup sec-model usm sec-level authnopriv
read-view defaultAdminView write-view defaultAdminView notify-view defaultAdminView
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
, security level
usm noauth
, read view defaultAdminView, write view defaultAdminView, notify
authnopriv
, read view defaultUserView, no write view, notify view
configure snmpv3 add access
143