Configure Snmpv3 Engine-Boots - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 engine-boots

configure snmpv3 engine-boots <(1-2147483647)>
Description
Configures the SNMPv3 Engine Boots value.
Syntax Description
(1-2147483647) Specifies the value of engine boots.
Default
N/A.
Usage Guidelines
Use this command if the Engine Boots value needs to be explicitly configured. Engine Boots and Engine
Time will be reset to zero if the Engine ID is changed. Engine Boots can be set to any desired value but
will latch on its maximum, 2147483647.
Example
The following command configures Engine Boots to 4096:
configure snmpv3 engine-boots 4096
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
174 ExtremeWare 7.5 Command Reference Guide