Configure Ports Vdsl - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

configure ports vdsl

configure ports <portlist> vdsl [5meg | 10meg | etsi]
Description
Configures VDSL ports.
Syntax Description
portlist Specifies one or more slots and ports. Can specify a list of slots and ports, and may be in the form
2:*, 2:5, 2:6-2:8.
5meg Specifies 5 Mbps.
10meg Specifies 10 Mbps
etsi Specifies ETSI Plan 997
Default
The default configuration for VDSL ports is 10 Mbps.
Usage Guidelines
Select the configuration that interoperates with the associated VDSL customer premises equipment
(CPE). A lower rate may support a longer cable distance, depending on the installation.
Example
The following command configures all the VDSL ports on slot 2 to 5 Mbps:
configure ports 2:* vdsl 5meg
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms that support VDSL ports.
282 ExtremeWare 7.5 Command Reference Guide