Extreme Networks ExtremeWare Command Reference Manual page 309

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable mirroring to port

The following example selects port 3 as a tagged mirror port on a stand-alone switch:

enable mirroring to port 3 tagged

The following example selects slot 1, port 3 as the mirror port on a modular switch:

enable mirroring to port 1:3

This command was first available in ExtremeWare 2.0.

This command was modified in ExtremeWare 4.0 to support the

keywords and

tag | untagged

modular switches.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5