Configure Snmpv3 Delete Group User - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 delete group user

configure snmpv3 delete group
[all-non-defaults | {{hex <hex value>} |<user name>} {sec-model
[snmpv1|snmpv2c|usm]}]
Description
Delete a user name (security name) from a group.
Syntax Description
hex
group name
all-non-defaults
user name
sec-model
snmpv1
snmpv2
usm
Default
The default values are:
• sec-model—USM
Usage Guidelines
Use this command to remove the associate of a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name username, the security name value is the same,
username.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
The default groups are: admin, initial, v1v2c_ro, v1v2c_rw.
The default users are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Example
Use the following command to delete the user guest from the group UserGroup for the security model
:
snmpv2c
configure snmpv3 delete group UserGroup user guest sec-model snmpv2c
166
{{hex <hex value>} | <group name>} user
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the group name to add or modify.
Specifies that all non-default (non-permanent) users are to be deleted from the
group.
Specifies the user name to add or modify.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
ExtremeWare 7.5 Command Reference Guide