Extreme Networks ExtremeWare Command Reference Manual page 157

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure snmpv3 add target-params

configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c

sec-level noauth

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5