Configure Snmpv3 Delete Mib-View - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 delete mib-view

configure snmpv3 delete mib-view [all-non-defaults | {{hex <hex value>} |
<view name> {subtree <object identifier>}]
Description
Delete a MIB view.
Syntax Description
all-non-defaults
hex
view name
subtree
Default
N/A.
Usage Guidelines
Use this command to delete a MIB view. Views which are being used by security groups cannot be
deleted. Use the
all-non-defaults
groups) except for the default views. The default views are: defaultUserView, defaultAdminView, and
defaultNotifyView.
Use the
configure snmpv3 add mib-view
by specifying a different view.
Example
The following command deletes all views (only the permanent views will not be deleted):
configure snmpv3 delete mib-view all-non-defaults
The following command deletes all subtrees with the view name AdminView:
configure snmpv3 delete mib-view AdminView
The following command deletes the view AdminView with subtree 1.3.6.1.2.1.2
configure snmpv3 delete
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
168
Specifies that all non-default (non-permanent) MIB views are to be deleted.
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the MIB view name to add or modify.
Specifies a MIB subtree.
keyword to delete all the MIB views (not being used by security
command to remove a MIB view from its security group,
mib-view AdminView subtree 1.3.6.1.2.1.2
ExtremeWare 7.5 Command Reference Guide