Enable System-Watchdog - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable system-watchdog

Enables the system watchdog timer.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

The watchdog timer reboots the switch if the CPU becomes trapped in a processing loop. If the

watchdog timer is executed, the switch captures information on the cause of the reboot and posts it to

the system log.

The following command enables the watchdog timer:

enable system-watchdog

This command was first available in ExtremeWare 6.1.9.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5