Extreme Networks ExtremeWare Command Reference Manual page 132

Commands for Managing the Switch
Example
The following command adds the IP address 10.101.0.100 as a trap receiver with community string
purple:
configure snmp add trapreceiver 10.101.0.100 community purple
The following command adds the IP address 10.101.0.105 as a trap receiver with community string
green, using port 3003:
configure snmp add trapreceiver 10.101.0.105 port 3003 community green
The following command adds the IP address 10.101.0.105 as a trap receiver with community string blue,
and IP address 10.101.0.25 as the source:
configure snmp add trapreceiver 10.101.0.105 community blue from 10.101.0.25
The following command adds port 9990 at the IP address 10.203.0.22 as a trap receiver with the
community string public, and the receiver should be sent standard traps for the trap groups for BGP and
Extreme Networks:
configure snmp add trapreceiver ipaddress 10.203.0.22 port 9990 community public mode
standard trap-group extreme-traps, bgp-traps
History
This command was first available in ExtremeWare 1.0.
This command was modified in ExtremeWare 6.2.1 to support the , , and source ( )
port community from
options.
This command was modified in ExtremeWare 6.2.2 to add the options.
mode
This command was modified in ExtremeWare 7.1.0 to add trap groups and the option.
version
This command was added to the "e" series of switches in 7.1e.
This command was modified in ExtremeWare 7.2e to add support for SNMP Version 2 and for the trap
groups.
Platform Availability
This command is available on all platforms.
132 ExtremeWare 7.5 Command Reference Guide