Extreme Networks ExtremeWare Command Reference Manual page 119

Hide thumbs Also See for ExtremeWare:

Table of Contents

Secondary Config: Empty

* Summit400-48t:3 #

This command was first available in ExtremeWare 2.0.

This command was modified in ExtremeWare 6.1.8 to display the mode of switch operation—extended,

standard, or auto—for the Alpine 3802.

This command was modified in ExtremeWare 7.0.0.

This command was added to the "e" series of switches in ExtremWare 7.1e.

This command was modified in ExtremeWare 7.3.0 to add an indicator for default configuration mode

(standard or enhanced).

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

7.2e.0 Build 26 [46]

5990 bytes saved on Wed Jan 12 15:54:31 2056

Extremeware 7.5