Enable Sntp-Client - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

enable sntp-client

enable sntp-client
Description
Enables the SNTP client.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
SNTP can be used by the switch to update and synchronize its internal clock from a Network Time
Protocol (NTP) server. After the SNTP client has been enabled, the switch sends out a periodic query to
the indicated NTP server, or the switch listens to broadcast NTP updates. In addition, the switch
supports the configured setting for Greenwich Mean Time (GMT) offset and the use of Daylight Savings
Time (DST).
Example
The following command enables the SNTP client:
enable sntp-client
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
206 ExtremeWare 7.5 Command Reference Guide