Disable Idletimeouts - Extreme Networks ExtremeWare Command Reference Manual

disable idletimeouts

disable idletimeouts
disable idletimeouts
Description
Disables the timer that disconnects idle sessions from the switch.
Syntax Description
This command has no arguments or variables.
Default
Enabled. Timeout 20 minutes.
Usage Guidelines
When idle time-outs are disabled, console sessions remain open until the switch is rebooted or you
logoff. Telnet sessions remain open until you close the Telnet client.
To view the status of idle time-outs on the switch, use the command. The
show management show
command displays information about the switch including the enable/disable state for idle
management
time-outs.
Example
The following command disables the timer that disconnects all sessions to the switch:
disable idletimeouts
History
This command was first available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 101