Managing the SAN Switch 2/32
Table 3–1: Port Side LED Patterns During Normal Operation (Continued)
LED Name
Color of LED
and
Location
No light
Port Speed
LED
Upper LED
Steady green
next to each
port
LEDs on the Non-Port Side of the SAN Switch 2/32
The non-port side of the switch contains the following LEDs, see Figure 3–2:
•
One Port Readiness LED on right side
•
One Power Supply LED next to the AC power switch on each power supply
•
One Fan Failure LED at the top of each fan assembly (inside the bezel)
1
1
Power supply LED
2
Fan failure LED
Figure 3–2: LEDs on non-port side of SAN Switch 2/32
3–4
Status of Hardware
Port is
transmitting/receiving at 1
Gbit/sec.
Port is
transmitting/receiving at 2
Gbit/sec.
2
Recommended Action
No action required.
No action required.
SHR-2579A
3
Port readiness LED
SAN switch 2/32 version 4.0.x installation guide
3