Download Print this page

HP 6125XLG Configuration Manual: Activating A Zone Set And Distributing It To The Entire Fabric; Triggering A Complete Distribution

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

Step
2.
Enter VSAN view.
3.
Configure zone
distribution and merge
types as complete
distribution and complete
merge.
Activating a zone set and distributing it to the entire
fabric
You can activate a zone set as the active zone set on a switch, distribute the active zone set to the entire
fabric, and implement access control through the active zone set. The modifications to the active zone set
do not take effect until reactivation.
When distributing the active zone set to the entire fabric, the switch determines whether to carry zone
database information according to the distribution type specified by the zoneset distribute full command.
The modifications to the active zone set do not take effect until reactivation.
Only one active zone set can exist in a VSAN.
To activate a zone set and distribute it to the entire fabric:
Step
1.
Enter system view.
2.
Enter VSAN view.
3.
Activate the specified zone set
as the active zone set and
distribute it to the entire fabric.
NOTE:
Active zone set information will not contain the alias names of zone members. If a zone in the active zone
set has members with a zone alias, the non-overlapping N_Port members in the zone alias are directly
added to the zone. You can view the zone member change by using the display zoneset active command.

Triggering a complete distribution

Use the zoneset distribute command to trigger a complete distribution, which distributes both the active
zone set and zone database.
After activating a zone set as the active zone set by using the zoneset activate command, you can modify
the database configuration. With the zoneset distribute command, you can distribute the active zone set
and the modified database to the entire fabric without changing the active zone set.
To activate a complete distribution:
Command
vsan vsan-id
zoneset distribute full
Command
system-view
vsan vsan-id
zoneset activate name zoneset-name
80
Remarks
N/A
The default setting is incomplete
distribution and incomplete merge.
Remarks
N/A
N/A
The zone set to be activated
must have been created and
must consist of at least one
N_Port member.

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: