Removing A Zone From A Zone Set; Activating A Zone Set; Activate Zone Set Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

3. Right-click the member you want to remove and click Remove.
4. Click OK.

Removing a zone from a zone set

1. Display the zone library. See
The Zoning dialog box is displayed
2. Expand a zone set by clicking the + symbol in the Zone Sets list.
Right-click the zone you want to remove and click Remove.
3.
4. Click OK.

Activating a zone set

NOTE: Activation speeds can vary depending on the hardware vendor and type of zoning used.
To activate a zone set:
1. Display the zone library. See
The Zoning dialog box is displayed
2. Select a zone set from the Zone Sets list.
Click Activate.
3.
The Activate Zone Set dialog box is displayed
.
Figure 100

Activate Zone Set dialog box

4. Verify the information and click OK.
162 Zoning
"Displaying the zone library" on page 159.
(Figure 98 on page 159).
"Displaying the zone library" on page 159.
(Figure 98 on page 159).
(Figure 100).