Renaming A Zone Set; Copying A Zone Set; Adding Zones To A Zone Set; Removing Zones From A Zone Set - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Renaming a zone set

To rename a zone set, enter the zoneset rename command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset rename zoneset_old zoneset_new
8/20q FC Switch (admin-zoning) #>zoning save

Copying a zone set

To copy a zone set and its contents to a new zone set, enter the zoneset copy command, as shown in
the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset copy zoneset_1 zoneset_2
8/20q FC Switch (admin-zoning) #>zoning save

Adding zones to a zone set

To add a zone to a zone set, enter the zoneset add command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset add zoneset_1 zone_1 zone_2
8/20q FC Switch (admin-zoning) #>zoning save

Removing zones from a zone set

To remove zones from a zone set, enter the zoneset remove command, as shown in the following
example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #> zoneset remove zoneset_1 zone_1 zone_2
8/20q FC Switch (admin-zoning) #>zoning save

Activating a zone set

To apply zoning to the fabric, enter the zoneset activate command, as shown in the following
example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoneset activate zoneset_1

Deactivating a zone set

To deactivate the active zone set and disable zoning in the fabric, enter the zoneset deactivate
command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoneset deactivate

Managing zones

Managing zones consists of the following tasks:
• Creating a
• Deleting a
• Renaming a
• Copying a
• Adding members to a
• Removing members from a
All of these tasks require an Admin session and a Zoning Edit session.
zone, page 84
zone, page 84
zone, page 84
zone, page 84
zone, page 84
zone, page 84
8/20q Fibre Channel Switch command line interface guide 83