HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 60

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1 New and Changed Features for Release 3.x (continued)
Feature GUI Change
Local Roles New Web Local Roles
configuration screen
Performance New Performance
Prediction Prediction tab
Performance statistics New Last Updated
column on performance
statistics
Crossbar graceful Out of Service menu
shutdown item on Supervisor
context menu
Crossbar removal ---
procedures
Supervisor-2 module ---
support
Generation 2 ---
switching module
support
CFS support for Allowed DomainIds tab
allowed domain ID under VSAN, Domain
lists Manager
CFS over IP ---
Cisco MDS 9000 Family Fabric Manager Configuration Guide
lx
Description
Enables you to configure local
roles.
Provides a way to more reliably
predict when storage network
connections will become
overutilized.
Displays the date and time the
statistics were last updated.
Provides procedures for gracefully
shutting down the crossbars on the
Cisco MDS 9500 Series Directors.
Provides the recommended
procedures to prepare to remove
crossbars from Cisco MDS 9500
Series Directors.
Includes support for the following
Supervisor-2 module features:
Configuring modem
•
parameters on the console port
and COM1 port.
Allowing 1000 Mbps speed on the
management port.
Describes how to configure
interfaces on the Generation 2 Fibre
Channel switching modules.
Enables the allowed domain ID lists
to be distributed in the fabric using
the CFS infrastructure.
Enables CFS distributions over IP
connections.
New and Changed Information
Changed
in
Release Where Documented
3.0(1) Chapter 7, "Fabric
Manager Web Server"
3.0(1) Chapter 7, "Fabric
Manager Web Server"
3.0(1) Chapter 7, "Fabric
Manager Web Server"
3.0(1) Chapter 18, "Managing
System Hardware"
3.0(1) Chapter 18, "Managing
System Hardware"
3.0(1) Chapter 12, "Initial
Configuration"
3.0(1) Chapter 22, "Configuring
Generation 2 Switches
and Modules"
3.0(1) Chapter 25, "Configuring
Domain Parameters"
3.0(1) Chapter 13, "Using the
CFS Infrastructure"
OL-8007-10, Cisco MDS SAN-OS Release 3.x